Hose Diaphragm Valves DN 15 - DN 200 with
ISO 5210 mounting flange for piston actuators
type 100.104 B



Range of application:
Acids, alkaline solutions, aggressive liquids, sludges, waste water, sand-water mixtures, ore-sludge and coal-silt, abrasive media,
powdery products (like e.g. cement, lime, gypsum etc.), mineral oil, water, air, neutral media, liquids containing solids, crystallizing media, highly viscous media, syrup, juices, mash.

Hose Diaphragm Valves DN 15 - DN 200 with ISO 5210 flange for piston operation - type 100.104 B
zoom in


Hose Diaphragm Valves DN 15 - DN 200 with ISO 5210 flange for piston operation - type 100.104 B
Fig. 104 B
zoom in



Construction:
with mounting flange
ISO 5210 F 10 or F14,
with turning stem,
with lantern piece, 
free and smooth opening passage,
without stuffing box,
with interchangeable rubber lining,
with controlled operation,
body with polyester powder coating.

Materials:
see table (other materials on demand).

Operating pressure:
DN 15 – 80    max. 6 bar
DN 100    max. 5 bar
DN 125 – 200    max. 3 bar

Operation:
with pneumatic piston actuator
(as per type sheet 1200.1202)

Flange connection:
DIN 2501, PN 16,
DIN 2533 / EN 1092-2, PN 16
DN 200  = DIN 2501 PN 10,
 DIN 2532 / EN 1092-2, PN 10



Special constructions:
in bigger sizes and for higher pressure stages,
rubber lining in quality NR food or heat resistant,
rubber lining in quality Perbunan NBR, Neoprene CR, Butyl llR, Hypalon CSM or EPDM.
DNLL1L2ØDD1D7HB¹)strokeKVS
values
weight approx. kgs
1513010410495108701001312256
2015010510513122176,6
2516011511013128358
32180140128134425010
402001141141501351021451634311512,7
502301651784416014
652901851701702404017023
803102002132455228926,5
1003502203252906834745
12540015415425026037235010572258
15048028547041012595083
1755503155004651451021124
2006003505005391361725132
dimensions in mm
¹) max. valve-/actuator width (not drawn)
assignment of the actuators
DNpneumatic
type 1200.1202operating pressure max. bar
15DLP100-30A6
20DLP100-30A6
25DLP100-30A6
32DLP100-30A6
40DLP125-50A6
50DLP125-50A6
65DLP160-50A6
80DLP160-50A6
100DLP160-70A5
125DLP250-130A3
150DLP250-130A3
175DLP250-140A3
200DLP250-140A3
An assignment of the actuator can only be effected after presentation of the operating data.
partdesignationmaterial
1upper part of the body ¹)GG 25
2lower part of the body ¹)GG 25
3rubber liningNR (+85° C)
4pressure partGGG
5divided ringsteel
6guiding nutGG 25
7stem1.4021
9holding disczinc-coated steel
10holding screwzinc-coated steel
12couplingstainless steel
¹) parts 1 and 2 to be ordered together only.

Please quote the medium, concentration, temperature,
max. and min. working pressure in inquiries and orders.

We reserve the right to alter technical data.