Rubberlinings for Hose Diaphragm Valves
DN 15 - DN 200 for all types

Rubberlinings / hose inserts part 3
for Hose Diaphragm Valves

- with handwheel – type sheet 100.101 -
- with pneumatic actuators – type sheets 1200.1201 and 1200.1202
- with electric actuators  – type sheets 1200.1203, 1200.1204 a. 1200.1205
- for hose pinch float valves – type sheet 500.501
- for hose pinch float safety valves – type sheet 800.801


Rubberlinings for Hose Diaphragm Valves DN 15 - DN 200 for all types


available in varying materials and qualities:

natural rubber NR 5153 black                                / max. + 80° C
- standard – also abrasion resistant –
natural rubber NR 526black3  / max. + 90° C
natural rubber foodstuff resistant NR 5055 bright         
– also according to FDA          / max. + 70° C
perbunan NBR 5960/ max. + 70° C
Neoprene CR 4860  / max. + 70° C
EPDM 5562  / max. + 90° C
Hypalon CSM 5664 / max. + 70° C
Butyl IIR 5560 / max. + 70° C
natural rubber with PTFE-foil/ max. + 90° C.

Temperature data refer to water.
We like to offer special qualities on demand.

The resistance of the materials above is depending on the concentration and temperature as well as on the operation pressure of the process media.
Threaded parts vulcanized into rubberlinings building the bolt connections to the control spindle of the armature on one side and on the other to the valve body.
With it a controlled operation is made so that the rubber linings - also with sticky media and media tending to incrustation - always open faultlessly.
By the squeezing operation unwanted deposits will be detached and flowing off.

These high class lining and mould parts are produced in steel moulds due to decades of experience. Fabric linings in polyamide fabric are integrated onesided on the upper side to reinforce the rubber lining and are vulcanized.

The close cooperation with our rubber laboratory and available resistiveness lists aim to determine the most resistive rubber composite and quality for specific needs and cases of operation.
The rubber lining is only in contact with the process medium.
After the replacement of this spare part, to which there is a mounting instruction available - see product selection „technical documentation“ - our customers have again a armature as good as new.


Please quote the medium, concentration, temperature,
max. and min. working pressure in inquiries and orders.

We reserve the right to alter technical data.