pneumatic and electro/pneumatic positioner type 824 P / 824 E / 824 X / 824 D
page 1 of 4



pneumatic and electro/pneumatic positioner
type 824 P / 824 E / 824 D


are analog controller, working on the principle of comparing forces and can be extended
with several additional modules.
The pneumatic nominal value input signal from a pneumatic controller or from an I/P-converter
module creates a force on the diaphragm, that is compared with the spring force on
the feedback shaft. The resulting difference of force is moving the gate valve, that is connecting
the gear with the supply air and thus controlling the movement of the valve.
The type 824 D controller has the protection class IP 65.
general data
body materialcast aluminium / plastic
protection classIP 54, type 824.D IP 65 according to EN 60529
fitting positionarbitrarily
climate classoperation4K3, but -20 ... +80 °C, low temperature version-40 ... +80 °C
(on explosion-protected devices see electrical data)
vibration resistance< 10g according to DIN 89011
recommended continuous operation for the whole armature ≤ 3 g
CE markcompliance with EMV-directive 2004/108/EC in line
with EN 61326 A1 and NAMUR NE21 08.98
controller datagainmax. 100
hysteresis< 0,7 % of the control range
threshold< 0,5 % of the control range
linearity error< 2 % of the control range
draught dependency< 0,2 % / 0,1 bar, type 824.P < 0,1 % / 0,1 bar
dimensionssee dimension drawings figures 1 to 3
weighttype 824.Pappr. 1,8 kg
type 824.E a. 824.Xappr. 2,0 kg
type 824.Dappr. 2,8 kg
pressure gauge groupappr. 0,5 kg
pneumatic data
air supply pressure1,4...6 barg
air qualitysolidsclass 2 ISO 8573-1 (particle size ≤ 1 µm, particle density
≤ 10 mg/m³ i.N.)
dew pointclass 2 ISO 8573-1 (-40 °C, minimum 20 K below ambient temperature, low temperature version < -50 °C)
oil contentclass 2 ISO 8573-1 (≤ 0,1 mg/m³ i.N.)
air consumption< 0,6 m³/h i.N., type 824.P < 0,5 m³/h i.N) in stationary operation
flow rate6 m³/h i.N. bei 1,4 barg
electric / pneumatic data basic unit
pneumaticnot
explosion-
proof
explosion-
proof
intrinsically safe
explosions-
proof
flameproof
enclosure
electrical connectionsee figure 4see figure 4see figure 4
input signal0,2 ... 1 bar0 / 4 ... 20 mA0 / 4 ... 20 mA0 / 4 ... 20 mA
partial ranges0,2 ... 0,6 ... 1 bar0 / 4 ... 10 /
12 ... 20
mA
0 / 4 ... 10 /
12 ... 20
mA
0 / 4 ... 10 /
12 ... 20
mA
load resistance170 Ω170 Ω260 Ω
required load-
voltage
3,4 V3,4 V5,2 V
explosion-proof basic unit
explosion-proofintrinsically safe
zone 1+2 (gas)
II 2 G EEx ia IIC T6
EG-type examination certificate TÜV 99 ATEX 1487X
flameproof enclosureII 2 G EEx d IIC T4/T6/T6
EG-type examination certificate DMT 02 ATEX E121X
inner capacitynegligible
inner inductancenegligible
admissible ambient-
temperature on
connection to
electric circuit with ¹)
T4- 55 ... + 80 °CU₀ ≤ DC 28 V, Ik≤ 120 mA, P ≤ 3,3 W
T5- 55 ... + 70 °CU₀ ≤ DC 38,8 V, Ik≤ 60 mA, P ≤ 2,3 W
T6- 55 ... + 60 °CU₀ ≤ DC 42,5 V, Ik≤ 50 mA, P ≤ 2,1 W
¹) admissible ambient temperature with other electric circuits on demand
back to overview
download data sheet